6
+48V PHANTOM POWER SWITCH
This switch enables the phantom power to the
Mic 1
and
Mic 2
inputs. Dynamic
microphones do not require phantom power to operate, but are not harmed by it. Most
condenser microphones do require phantom power to operate. If you are unsure about
the phantom power requirements for your microphone, consult your microphone’s
documentation or contact the manufacturer. This switch should be OFF if you are
connecting any line-level source to the Mic In jacks.
USB PORT
The USB Port is used to connect the Lambda Studio to your computer and provides the
Lambda Studio hardware with power. A standard USB cable is included. The Lambda
Studio supports USB 2.0 full speed.
The Rear Panel
IMPORTANT:
To avoid damage,
do not plug a line
output into the
Mic
In
jacks unless the
+48V
switch is
turned off.
