Lexicon CP-3 PLUS - THEORY AND DESIGN REV 2 Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 61

Lexicon CP-3 PLUS - THEORY AND DESIGN REV 2 Скачать руководство пользователя страница 37

32

Lexicon

Customization

Chapter 3 describes the CP-3

PLUS

’s four basic modes and all of their variable

parameters. Any changes in the parameters of a mode in the User bank will
be automatically recorded and stored for future use. The CP-3

PLUS

also

allows you to store a new version of any Preset or User mode in any User
register.

In addition to the 15 Preset modes set at the factory, there are 30 User
registers (Bank A 1-15 and Bank B 1-15) that can be used to store customized
versions of the original modes. Any of the parameters that can be accessed
and changed with the Expanded remote can be used to modify the modes.
Left/Right BALANCE and VOLUME settings are considered system para-
meters and are not stored with each mode. EFFECT LEVEL, and parameters
listed in the parameter menu, will be memorized in this new mode if it is
stored in a User register. Front/Back BALANCE, unlike other parameters,
is not automatically stored in either user bank (A or B), but must be explicitly
stored using the following procedure.

If you modify a Preset (or the contents of any User register) and want to
make a copy of it, press STORE. The display will read:

STORE MENU

>STORE THIS MODE

SET MODE NAME.

Press PARAM

▲

once and the display will read:

(12-letter mode name)

PUT PRO LOGIC

IN A1 PAN NORM

(User reg #)

(Mode type

Mode name

1st 3 letters)

(1st 4 letters)

The top line of the display will show the mode you are about to save. The
second line shows the location (and current contents) of the register where
the mode will be saved.

If you wish to store your new mode into the register shown, simply press
STORE. This will erase the register contents and replace it with your new
mode.

If you want the mode stored in a different location, press PARAM

▲

to

display (and select) the next register. Repeatedly pressing PARAM

▲

will

step you through all 15 User registers in Bank A, then through all 15 User
registers in Bank B. (PARAM

▼

allows you to step back down through the

list.) When you find the register you want, press STORE.

If you want to exit without copying your new mode, press SETUP to return
to the operating mode you were in when you began the store procedure.

Modifying the Mode

Storing a mode

«
...
35
36
37
38
39
...
»

Содержание CP-3 PLUS - THEORY AND DESIGN REV 2






























































Отзывы:

Нет отзывов