5
Version 2.5 Software Release
960L
Parameters
Please refer to the parameter section for Simple Delay and
Dual Delay. This section will only describe parameters not
introduced earlier.
Note:
The Hold parameter works as described earlier,
except that only Voice 1 is recirculated. The
output from all voices is still available.
General Parameters
FsLvl
Sends the Front Left/Right inputs to the
Surround Left/Right inputs. This is useful in
situations where only a stereo input signal is
present. It allows as many as 12 voices to exist
for a stereo signal.
Rand1
Selects the randomizer type for Randomizer 1.
Choices are:
SloRand: One delay voice at a time is changed, at the
rate specified in Mod1.
FstRand: All delay voices are changed at once, at the
rate specified in Mod1.
Gate: Wander time is added to all delay voices
whenever the input level is above the
threshold specified in Mod1.
-Gate: Wander time is added to all delay voices
whenever the input level is below the
threshold specified in Mod1.
Wand1
Specifies the amount of delay that is added
to voices affected by Randomizer 1. For any
of the Gate modes, the full amount is added.
For the Rand modes, the wander amount can
be anything between 0 and the full
randomizer amount.
Mod1
Modifies Randomizer 1. This can be a
threshold or a rate, depending on the value
of Rand1.
Rand2,
Control Randomizer 2.
Wand2,
Mod2
V1Rand
Designates the Randomizer that affects all
Voice 1s (Voice Ones). This can be Rand1,
Rand2, or no Randomizer.
V2, V3
Designate the Randomizer for Voices 2 and 3.
Rand
Delay Voice Parameters
Xfd
Works like the Crossfeed parameter in Delay,
except for the target. The crossfeed data is
sent to the opposite corner. Left Front goes to
Right Surround; Left Surround goes to Right
Front.
