4. Press [5] key continuously to scroll and select the high temperature alarm , low temperature
alarm or disable the alarm function (blank).
5. Press MODE [1] to save your settings.
Outside temperature alarm
1. Scroll to temperature outside alarm mode by pressing MODE [1] 4 times repeatedly.
2. Press CHN [4] to select the channel of the desired transmitter.
3. The default value 14°C or existing preset will flash.
4. Press HOUR/+ [2] or MINUTE/– [3] keys to set the temperature limit value.
5. Press [5] key continuously to scroll and select the high temperature alarm , low temperature
alarm or disable the alarm function (blank).
6. Press MODE [1] to save your settings.
When the temperature alarm sounds
The icon signals that the temperature has exceeded the preset temperature limit.
a. Press any key to stop temperature alarm.
b. If no key is pressed, the temperature alarm will automatically stop itself after one minute.
Derived from the Greek word "anemos" (wind), an anemometer is a device measuring the velocity of the
wind. The SM1960 anemometer also indicates the wind direction. The Beaufort Wind Scale is the
international standard to measure wind speed. Sir Francis Beaufort of the British navy introduced this
scale in the early 19th century by using the speed of a fully rigged sailing vessel to describe the wind
speed. The table below illustrates the relationship between the Beaufort force and wind speed:
Min and Max Temperature & Humidity
Press [5] in clock mode to toggle between: maximum wind speed, maximum temperature,
minimum temperature; maximum humidity record and minimum humidity record.
Display HI & LO
"Hi" and "Lo" displayed onscreen mean that the temperature or humidity is outside the range of
specification.
The trend indicator shows the trend of temperature & humidity determined by the particular sensor in
the past half hour interval.
You can set high temperature or low temperature alarms for one local channel and for one remote
channel.
Inside temperature alarm
1. Scroll to temperature inside alarm mode by pressing MODE [1] 3 times repeatedly.
2. The default value 14°C or existing preset will flash.
3. Press HOUR/+ [2] or MINUTE/– [3] keys to set the temperature limit value.
SM1960IM size : 110mm W x 105mm H
English
English
33
WIND SPEED/DIRECTION DISPLAY
TEMPERATURE & HUMIDITY TREND
TEMPERATURE ALARM
34
Inside/ Outside
Temperature
Humidity
Display
Inside
> +55°C
> 95%
HI
Inside
< -20°C
< 15%
LO
Outside
> +70°C
> 95%
HI
Outside
< - 30°C
< 15%
LO
Arrow Indicator
Trend
Rising
Steady
Falling