10
ENGLISH
Connecting the console to a television
Location of the games console and playing area
The “TV Motion Games Console” needs to be connected to a television.
Note:
Switch off the television
AND
the console
BEFORE
connecting.
1. Plug the AV cable (yellow connector) into the corresponding video input on the television.
2. Plug the AV cable (white connector) into the corresponding audio input on the television.
3. Plug the AV cable (red connector) into the corresponding audio input on the television.
To make the most of playing on the console, read the instructions listed below:
• Position the console as shown on the diagram below:
1m to 2m
4. Switch on the television.
5. Select the AV channel, also called “INPUT” or “Auxiliary”
Note:
It’s possible that changing the channel is done using the television’s remote control. Check the television’s
instruction manual.
6. Switch the games console on by pressing the “POWER” button.
7. To switch the games console off, press the “POWER” button, then unplug the AV cable.
WARNING:
Mal-function or loss of memory may be caused by strong frequency interference or electrostatic
discharge. Should any abnormal function occur, reset the unit or remove the batteries and insert them again, or
unplug the AC/DC adapter from the mains socket and plug it back in.
JG7300IM1252_25Jun_V04.indb 10
22/06/2012 12:09 PM
