20
21
ENGLISH
1. Fix the device holder in the two holes on top of the Bluetooth
®
tower.
2. Place your device over the slot.
3. Connect one end of a cable (not included) to your device and the USB end to
the USB DC 5V
charging port at the rear of the tower.
Notes: the personal device automatically charges when it is connected to the
Bluetooth
®
tower. Make sure the tower is supplied with power.
The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Lexibook® is under license.
Other trademarks and trade names are those of their respective owners.
© 2014 Bluetooth SIG, Inc.
Initial Pairing
1. Switch on the Bluetooth
®
tower and press the SOURCE button to select
Bluetooth
®
mode (bt). The Bluetooth
®
LED blinks while searching for a device.
2. Activate the Bluetooth
®
function on your personal device. Please refer to the
instruction manual of your device on how to active this function.
3. Select the Bluetooth
®
tower name and start pairing your personal device with
the tower.
4. Once both device and tower are connected, play an audio or a video file.
Adjust the sound volume level using the keys on your personal device or the
volume buttons of the tower or remote control.
Re-pairing
When the tower or Bluetooth
®
mode has been switched off:
1. Switch on the Bluetooth
®
tower and press the SOURCE button to select
Bluetooth
®
mode (bt).
2. The Bluetooth
®
LED blinks for 3 seconds and automatically finds the last
device it was paired with.
3. If no device is found, the Bluetooth
®
LED continues to blink. Press SOURCE
to select other modes: FM, AUX or L IN.
CHARGING A PERSONAL DEVICE USING THE BUILT-IN USB PORT
BLUETOOTH
®
SET UP
BT1000seriesIM1274_18Jun_V25.indd 21
19/06/2014 2:55 PM