LEXGO LEX R9, Руководство пользователя, Страница: 11 / 16

11
8. BATTERY
In order to avoid damage and/or the early deterioration of the battery, charging must be
carried out ta in a dry environment and at a temperature within the range indicated between the
stiche Technical Characteristics of the product.
Open the CC power outlet cover cap on the product.
Ensure that all connectors and sockets involved are dry (especially the CC power outlet on the
product).
Connect the power supply to an electrical grid, in accordance with the license plate data shown
on the medesi-mo mo
(if the connection is correct the LED on it lights up green), then insert
the CC power connector into the CC power outlet on the product: when the battery is charging
the LED on the power supply will be red; on full charge its color will turn green.
At the end of charging, protect the power outlet with the plug.
The battery charge status is indicated on the display by the special icon (6 notches
corresponding- gift to the highest level of charge).
Attention! It is recommended that you do not leave the product connected to the power supply
for prolunperiods
gati and no later than the time it takes to fully charge the battery because this
could adversely affect the performance and longevity of the latter.
SAFETY WARNINGS
• Keep kids away from battery and
power
supply.
• Always store and use the battery and power supply in dry environments with
temperatures within the range specified at Cap . 2 "Technical features" and with
adequate ventilation .
• DON'T charge the battery outdoors or with weather exposure.
• Prevent the battery from coming into contact with water or other liquids (danger of
chemical reactions).
• Keep the battery away from flames and heat sources: it could explode.
• DON'Tshort- circuit the electrical contacts of the battery: it could explode .
• DON'T bump or shake the battery violently: in case of rupture do not touch with your
bare hands .
• DO NOT open or disassemble the battery for any reason.
• DON'T use non-genuine power supplies: Using a non-genuine power supply can cause
damage and even battery explosion; If the power supply is damaged or damaged, contact
the Service.
• Verify that the power grid to which the power supply connects complies with the license
plate data on its label.
• DON'T electrically connect other devices other than the original battery to the power
supply.
• DON'T leave the power supply connected
to the power
grid for a long time, in
the absence of load (battery not charging).