Lewmar Thruster 110TT and 140TT 2.0 Manual ref B10417 iss.2
|
5
3.3 Preparing for fitting the thruster
Fig 3.3.1
Fig 3.3.2
Fig 3.3.3
Fig 3.3.4
The Thruster can be installed at any angle within 90°
from vertical.
‣ Choose position of thruster, ensuring internal room for motor and controls and that the propeller is easily
reached from outside.
NOTE: Fig 3.3.2. - Normal install is to Port
‣ Place the thruster saddle in the desired position,
ensure the fit is firm and free from movement then
mark centre.
‣ To aid installation a kit is available. See Sec 6.6
Accessories.
‣ Position template on centre line, double check
everything and drill. Remove all burrs. All the holes
must be on the centre line. Poor alignment may
affect hub positioning.
⚠ Electric motors must be supported if installed
more than 30° from vertical (Fig 3.3.1).
600 mm
(24”) Max
