12
6- Servicing your thruster
7- Specifications
At the annual boat service:
‣ Remove any debris from tunnel, propeller and hub.
‣ If the propeller is damaged or heavily contaminated,
replace it, best to be safe.
‣ Apply grease to exposed thruster seal and shaft.
‣ If hub is removed the tunnel gasket must be
replaced.
‣ Inspect motor, ensure all leads are still tight.
‣ Check all bolts and nuts are to correct torque.
‣ Check the motor assembly is dry and that the
compartment is water tight.
‣ Check and clean out thruster compartment.
Electric:
‣ Inspect electric motor, ensure all leads are still
tight.
‣ Brush out carbon dust from top of electric motor
especially on aluminium boats. Recommend
qualified electrician.
‣ Propeller: Single 5 blade
‣ Suitable fuse holder:
Standard - 589006 or T2- 589013
Thrusters are more likely to attract ‘debris’, so it is necessary to regularly check the tunnel.
6.1 Service schedule
6.2 Changing drive pin
Cut cable tie on shaft (if fitted)
Tap in new pin and secure with new
plastic cable tie
Punch out pin parts
PART NO
MODEL
VOLTAGE
POWER
GEARBOX
MATERIAL
TUNNEL
THRUST
WEIGHT
FUSE
V
kW
hp
(mm)
kgf
lbs
Kg
lbs
591101
110TT1.5
12
1.5
2.0
Composite
110
28
62
10
22
200A- 589012
591482
140TT2.0
12
2.0
2.7
Composite
140
37
81
13
29
200A- 589012
Fig 6.2.1
Fig 6.2.2
Fig 6.2.3
GB
