05
User-interface
②
On / Off switch
③
Status indicator
④
Polar pattern selection, jog-dial
①
Mains voltage selection switch
⑤
High-pass filter indications
⑥
Noiseless high-pass filter
push button
⑦
Pre-attenuation indications
⑧
Noiseless pre-attenuation push button
⑨
3-pin XLR socket
⑩
11-pol. XLR-Stecker
Mains socket
Fuse
11-pin audio cable
Getting started
■
Make sure that the Mains voltage selection
①
switch is set
to the correct position.
■
Use the 11-pin audio cable to connect the microphone with
the 11-pin XLR socket on the backside of the PSU.
■
Use the 3-pin audio cable to connect your mixer with the
3-pin XLR socket
⑩
on the backside of the PSU.
■
Put the LCT 840 into operation by activating the On / Off
switch
②
on the backside of the PSU.
LCT 840
Using the mic
⑦
③
⑧
④
⑥
⑤
①
②
⑩
⑨
