6
//
User interface
1
Status indicator
//
Indicates different active settings such as key lock,
automatic attenuation, clipping history ... see below for details.
2
Low-cut filter
/
/ Use to reduce unwanted low frequency noise caused by wind,
footsteps, structure-borne noise or likewise. The low-cut filter at 80Hz affects
the microphone input by 12 dB per octave and can be set by pressing the left
pushbutton .
3
Pre-Attenuation
//
Use this pad function to prevent clipping when recording
very loud sources. Choose between 0 and 20 dB of attenuation. Change settings
with the right pushbutton .
4
Left push button
//
Push to change low-cut settings. It also activates the
Clipping History.
Clipping history
//
Pressing the left pushbutton for more than two seconds
activates and deactivates the Clipping History. If clipping occurred since you
have checked previously, the Status Indicator blinks red, the manually
set level of pre-attenuation blinks and the suggested attenuation setting is
illuminated. The history will be cleared after leaving the Clipping History.
2
1
3
5
4
1
5
4
