2
Warm Tips
Thank you for purchasing this item. For your better use, please read the
following instructions first.
1.0-3
th
and 12-15
th
servo interfaces of this LSC-16servo controller have
over-current protection which is already shown in the picture below. Please
give priority to these interfaces when connecting servos.
2.Please first fix nylon column or copper column on the servo controller to
prevent it from burning out during the debugging process, because mistakes
happen much more easily if the bottom of the controller touches the metal
objects.
3.Please connect the positive and negative wires to the servo controller first
before you connect battery to the servo controller, and then connect the battery
to the wire interface, and finally turn on the switch, it is worth noting that
positive and negative wires contacting can cause a short circuit. Do not expose
the wire out of the controller when it is wired.
4.The servo controller module is not intended for young children! Younger
users should use this module only under adult supervision.
5.The servo controller module is not intended for young children! Younger
users should use this module only under adult supervision.
