6
Maintenance and repairs
Refer to operating instruction B 0.100.1.
6.1 Maintenance
6.1.1 Inspection intervals: lubricant
In order to prevent problems check lubricant level weekly.
1.
Stop metering pump and wait for approximately 5 minutes.
2. Remove screwed plug of the hydraulic snifting valve (529) (see fig. 2).
3. The lubricant level indicated must be within the range of the cross bore visible from above (see
figure 2).
4. If required top up lubricant. For this remove air filter (39).
For grade of lubricant refer to section 5.2.
5. Reinstall air filter (39).
Fig. 2
Lubricating oil level
Screwed plug
5
Drive element LEWA - ecosmart® type LCA manual stroke adjust., motor vertically B 1.660 en
