Levolor Woods Standard, Руководство пользователя

Страница: 9 / 56

9
Activating and Operating
Remote Control Guide
SET A FAVORITE POSITION
Each blind has one FAVORITE position. Default setting is
slats tilted up at a 45 degree angle. Setting a new FAVORITE
position overwrites any previous setting.
1. Using the manual control button located on the
headrail physically tilts slats open or closed to the
preferred FAVORITES position.
2. Press and hold
■
STOP until the RED programming
light on the lower left of the remote starts flashing,
then release. This puts the remote in program mode.
3. With one hand press and continue to hold the
manual control button.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
♥
FAVORITE on the remote until the slats move
slightly to indicate it has set this window covering
position as your FAVORITE.
5. Release both buttons.
6. To exit program mode press and hold
■
STOP until
the lights stop flashing.
OPERATING BLINDS
Once the blinds have been joined to a GROUP or multiple
GROUPS, the remote is ready to operate the blind(s). Multiple
window coverings can be operated at the same time.
1. To wake up the remote press
■
STOP. The GREEN
indicator light from the last GROUP(S) selected
will be highlighted and active.
2. Press ALL or GROUP 1, 2 or 3 button(s) to select
specific blind(s) to operate. The selected GROUP(S)
GREEN indicator light above the number will light to
show they are selected.
3. Multiple GROUP buttons may be selected at the
same time.
4. To deselect a GROUP, press the GROUP button again.
The GREEN indicator light above the GROUP button
will go out.
5. Press
▲
UP ARROW to tilt the slats fully open on the
selected blind(s).