Levolor Woods Standard, Руководство пользователя

Страница: 13 / 56

13
Reset Window Covering / Remote
Remote Control Guide
RESET BLIND PROGRAMMING
This reset erases all programming stored in the window
covering, including GROUP assignments, preventing
any remote from operating the blind. Reset window
covering program is used during installation to correct
GROUP assignments.
NOTE: This reset does not affect travel limits.
1. Press and hold the manual control button. Continue
to hold the manual control button until the blind
moves slightly up and down TWO times. This indicates
the window covering programming has been reset.
2. Release the manual control button.
3. Refer to “Join a blind to a GROUP” on page 8, to
program the window covering to a group.
RESET TRAVEL LIMITS
1. Press and hold the manual control button, until
the slats moves slightly up and down ONE time.
This indicates that the limits have been reset.
2. Release the manual control button.
3. The slats will now move on their own to set both
the top and bottom motor limits. Once this process is
done, the blind will move briefly in both directions.
RESET REMOTE
Removes any connections previously programmed between
the remote and any window coverings.
• Using a paper clip, BRIEFLY press the remote
reset button.
Previously paired blind(s) will no longer operate with this remote.