16
Resetting the Check
Filter Indicator
Reset the Check Filter Indicator when:
A.
lights up red.
1.
Replace the filter (see page 17).
2.
Turn on the air purifier.
3.
Press and hold the button for
3 seconds.
4.
will turn off when successfully
reset.
B.
The filter was changed before
lit up.
1.
Press and hold the button for
3 seconds.
2.
The will flash for 3 seconds.
3.
will turn off when successfully
reset.
CARE & MAINTENANCE
will light up as a reminder to check the
filter. If you use your air purifier consistently
(24 hours of daily use), the indicator should
turn on after about 6–12 months. You may
not need to change your filter yet, but you
should check it when turns on.
When your air purifier is set up with the
VeSync app, you can also check the app to
see your remaining filter life. You will also
receive a notification from VeSync when it’s
time to check your filter.
The VeSync app uses a scientific algorithm
to determine your filter life based on air
quality, amount of use, and other factors.
Check Filter Indicator
Cleaning the Smart Air Purifier
•
Unplug before cleaning.
•
Wipe the outside of the air purifier
with a soft, dry cloth. If necessary,
wipe the housing with a damp cloth,
then immediately dry.
•
Vacuum the inside of the air purifier.
•
Do not
clean with abrasive chemicals
or flammable cleaning agents.
Filter
When to Clean
How to Clean
When to Replace
Pre-Filter
Every 2–4
weeks
Use a soft brush or
vacuum hose
6–12 months
True HEPA
& Activated
Carbon Filter
Do not
clean
The outer pre-filter should be cleaned every
2–4 weeks to increase efficiency and extend
the life of your filter. Clean the pre-filter using
a soft brush or vacuum hose to remove hair,
dust, and large particles.
Do not
clean the
filter with water or other liquids.
Cleaning the Filter
