10
KEEPING THINGS CLEAN
Check Filter Indicator
Cleaning the Filters
Cleaning the Air Purifier
The Check Filter Indicator will light up as a
reminder to check the air filters. Depending
on how often you use the air purifier, the
indicator should turn on within 6–8 months.
You may not need to change your filters
yet, but you need to check them when the
indicator light turns on.
Reset the Check Filter Indicator by pressing
the reset button inside the vent on the side of
the air purifier (see page 12).
A.
The Fine Preliminary Filter should be
cleaned once a month to increase
efficiency and extend the life of your
filter. Clean the Fine Preliminary Filter
using a brush or vacuum hose to
remove hair, dust, and large particles.
B.
Do not
clean the True HEPA Filter. Fine
dust or bacteria may be released back
into the air if cleaning is attempted.
Only
clean the Fine Preliminary Filter.
C.
The Activated Carbon Filter does not
require cleaning.
Wipe the outside of the air purifier with a dry
cloth.
Do not
clean with water or any other
liquid, to avoid risk of electric shock.
A
B
C
Replacing the Filters
1.
Unplug the air purifier and remove the
back cover.
2.
Remove the old filters and properly
dispose of them.
3.
Unwrap the new filters. Place the
Activated Carbon Filter inside the
housing. Make sure the pull tabs are
facing out.
4.
Install the Preliminary/True HEPA
Combination Filter into the housing.
Make sure the pull tabs are facing out.
5.
Replace the back cover. The air purifier
will not power on unless the back cover
is replaced correctly.
6.
Press the Filter Indicator Reset Button
inside the vent (see page 12).
