17
1.
Unplug the air purifier, then twist the top
half of the air purifier counterclockwise
and lift up to remove it. (see
Getting
Started
, page 7).
2.
Remove the old filter from inside the
bottom half of the air purifier.
3.
Clean out any remaining dust or hair
inside the air purifier using a vacuum hose.
The AirSight Plus Laser Dust Sensor can be
blocked by dust, which affects the sensor’s
accuracy. Clean the sensor every 3 months.
Using your air purifier in an environment with
more dust may mean you will need to clean
the sensor more often.
1.
Unplug the air purifier.
2.
Place the end of a vacuum cleaner over
the sensor openings.
[Figure 3.2]
3.
Turn the vacuum on for at least 10
seconds to clean out dust.
Replacing the Filter
Cleaning the AirSight Plus
Laser Dust Sensor
Figure 3.2
Figure 3.3
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The filter should be replaced every 6–12
months. You may need to replace your filter
earlier or later depending on how often you
use your air purifier. Using your air purifier in
an environment with relatively high pollution
may mean you will need to replace the filter
more often, even if is off.
You may need to replace your filter if
you notice:
•
Increased noise when the air
purifier is on
•
Decreased airflow
•
Unusual odors
•
A visibly clogged filter
When Should I Replace the
Filter?
Note:
•
To maintain the performance of your air
purifier, only use official Levoit filters. For
more information, contact
Customer
Support
(see page 23).
•
Remember to reset after changing
the filter (see page 16).
Note:
If you remove and set aside the top
half of the air purifier, you can use water to
clean the bottom half of the air purifier. Do
not use water or liquids to clean the top half
of the air purifier.
[Figure 3.3]
4.
Remove the plastic packaging from the
new filter and place the filter inside the air
purifier. (see
Getting Started
, page 7).
5.
Place the top half of the air purifier
directly back onto the bottom half of the
air purifier, aligning each corner. Press
down to snap the top into place.
6.
Plug in and turn on the air purifier. Reset
the Check Filter Indicator (see page 16).
