12
The Plasma Function uses “Plasma
Technology Name” to generate positive
and negative ions that bind with pollutants
and neutralize them by breaking down their
molecular structure.
This helps neutralize particulate matter,
odorous gases, aerosols, and volatile organic
compounds (VOCs).
You can turn on Light Detection in the VeSync
app. When this mode is turned on, the Light
Sensor will automatically adjust air purifier settings
based on the amount of light in the room.
1.
The display will automatically turn off when
the room gets dark. If the air purifier is in
Auto Mode, it will not use the high or turbo
fan speeds, even when the air quality is
poor, to avoid making too much noise.
2.
When the room becomes light again, the air
purifier will return to its previous settings.
The display will automatically turn back on,
and Auto Mode will no longer be limited.
Plasma Function
Light Detection
USING YOUR PURIFIER (CONT.)
The air purifier is in Standby Mode when it is
turned off, but plugged in.
Note:
Display Lock can be used while the
air purifier is in Standby Mode to keep
the air purifier from being turned back
on. The laser dust sensor will still detect
the surrounding air quality and give you
updates in the VeSync app.
Note:
You cannot use the Plasma Function
during Sleep Mode.
When the air purifier is plugged in and turned
off, it will remember its previous fan speed,
Sleep Mode, Auto Mode, Display Lock, Display
Off, Light Detection, and Plasma settings.
When the air purifier is unplugged and turned
off, it will only remember its previous fan
speed, Sleep Mode, Auto Mode, and Light
Detection settings.
Note:
The air purifier will remember the last
timer setting chosen (1–12 hours), but it will
not automatically resume the timer. You will
need to restart the timer after the air purifier
is turned back on.
Memory Function
Standby Mode
