Levoit EverestAir LAP-EL551S-AUS, Руководство пользователя

Страница: 8 / 28

8
Note: Make sure the True HEPA filter (the side with
the ribbon handle) is facing outward when you
insert the filter.
Note: The front cover attaches to the air purifier
with magnets.
3. Place the front cover back on the air
purifier. Make sure to align the tabs on
the cover with the slots on the bottom of
the air purifier. [Figure 1.3]
Figure 1.3
Figure 1.4
GETTING STARTED
1. Place the air purifier on a flat, stable
surface such as the floor. Pull the front
cover to remove it. Pull the tabs to
remove the pre-filter from the air purifier.
[Figure 1.1]
Figure 1.1
Figure 1.2
2. Remove the True HEPA / activated
carbon filter from inside the air purifier.
Remove the plastic packaging from the
filter and place the filter and pre-filter
back into the air purifier. [Figure 1.2]
4. Insert the power cord into the back of the
air purifier.
5. When using the air purifier, allow at least
15 inches / 38 cm of clearance from the
front of the air purifier. Keep away from
anything that would block airflow, such as
curtains. [Figure 1.4]
15 in /
38 cm