Levoit EverestAir LAP-EL551S-AUS, Руководство пользователя

Страница: 19 / 28

19
Cleaning the AirSight Plus 2.0
Laser Dust Sensor
Replacing the Filter
If not using the air purifier for an extended
period of time, wrap both the air purifier and
the filter in plastic packaging and store in a
dry place to avoid moisture damage.
Storage
CARE & MAINTENANCE (CONT.)
The True HEPA / Activated Carbon Filter
should be replaced every 12–15 months.
You may need to replace your filter earlier
or later depending on how often you use
your air purifier. Using your air purifier in an
environment with relatively high pollution may
mean you will need to replace the filter more
often, even if is off.
You may need to replace your filter if you
notice:
• The air purifier does not effectively filter
certain odors anymore
• Increased noise when the air purifier is on
• Decreased airflow from the top of the air
purifier
• Unusual odors
• The HEPA filter is visibly dusty or
discolored after removing the pre-filter
When Should I Replace the
Filter?
Note:
•
To maintain the performance of
your air purifier, only use official
Levoit filters. For more information,
contact Customer Support (see
page 25).
• Remember to reset the
indicator light after changing the filter
(see page 17).
The AirSight Plus 2.0 Laser Dust Sensor
can be blocked by dust, which affects the
sensor’s accuracy.
Clean the sensor every 3 months. Using your
air purifier in an environment with more dust
may mean you will need to clean the sensor
more often.
1. Unplug the air purifier.
2. Place the end of a vacuum cleaner over
the sensor openings. [Figure 3.6]
3. Turn the vacuum on for at least 10
seconds to clean out dust.
1. Unplug the air purifier, then pull the front
cover to remove it (see Getting Started ,
page 8).
2. Remove the old filter from the air purifier.
3. Clean out any remaining dust or hair
inside the air purifier using a vacuum
hose.
Figure 3.6
4. Remove the plastic packaging from the
new filter and place the filter inside the
air purifier. (see Getting Started , page 8).
5. Replace the front cover.
6. Plug in and turn on the air purifier. Reset
the Check Filter Indicator (see page 17).
Note: Do not use water or liquids to clean
the air purifier.
[Figure 3.5]
Figure 3.5