Levo Combi Скачать руководство пользователя страница 19

Страница: 19 / 63

10.3

LEVO

combi

standard backrest

Information about the assembly of the

LEVO

combi

standard backrest is printed

under the sector 7.6. The standard backrest is not developed for quick fitting and
removing.

10.4

V-Trak backrest system (optional)

Fitting and removing the V-Trak backrest

Lift both backrest levers (A) at the back shell the

way

that

they

can

turn

freely.

Fitting:

For fitting the back stick the clamp bolt of both
backrest levers in the tubes of the connecting

piece (B) of both backrest tubes. The back shell

should be in front of the backrest tubes for
fitting. For fixing both backrest lever (A) push

them

down.

(See

picture

1).

Removing:

For removing the back fold the backrest lever

(A) up on both sides. Now lift the backrest up
and remove it.

10.5

Further preparations

Fold down the footrest.

Put the seat upholstery on the seat. Fix the upholstery on the seat metal plate

using the velcro fastener.

Screw the joystick module to the intended holder at the armrest.

Plug in the control cable behind the joystick module.

Ensure that the main fuse below the battery cover is put into the device.

Check that the free wheel device is clicked shut and the motor brakes function.

(For more information about that subject consult sector 16)

10.6

Knee Support

The LEVO c

ombi

will be delivered with the flexible knee support or the rigid

knee support Pro. The knee support positions the knee and the lower leg in
place during driving and in standing. Please note that the knee support is

absolutely important to use for standing. To enter or to leave the chair, the
knee support has to be taken off. For correct adjustment and handling please
see 9. Using the LEVO

combi

Содержание Combi
































































Результаты поиска

Содержание Combi

Отзывы:

Похожие инструкции для Combi

Бренды по названию

Популярные бренды

Levo Combi, Инструкция по эксплуатации

Результаты поиска

Содержание Combi

Отзывы:

Похожие инструкции для Combi

Бренды по названию

Популярные бренды