Levo Combi, Руководство по обслуживанию

Страница: 7 / 25

7
6 General repair instruction
Only a LEVO agent or their authorized dealers should carry out servicing and repairs to
the LEVO combi .
 Repairs: For advice in all repairs in Switzerland contact LEVO AG , Switzerland. For
all other countries contact your local LEVO agent. Addresses are given at the front
of this service manual or on the homepage www.levo.ch
 Major repairs: For all major repairs, e.g. bent or damaged frame, always replace
complete components. Never try to repair damaged steel work or components.
 Replacement parts: Factory replacement components should be used in all repairs;
these are available from LEVO AG . To order parts see the parts list drawings and
the correlative list, both available at LEVO AG .
• Locknuts must never be reused, but must be replaced by new ones.
• Secure each screw connection against inadvertent release. Use lock nuts or screw
securing adhesive, medium strength.
• Repairs to engines and electronic components must only be performed by the LEVO.
7 Tools & torque settings
The following tools are required to service the wheelchair:
 Spanners and sockets: 8 mm through to 24 mm.
 Hexagon key: 2 mm through to 8 mm.
 Screwdrivers: 1 Nm through to 50 Nm.
 Phillips head screwdriver and slotted screwdriver
 Soft headed hammer
 Snap through tool
Torque settings:
Bolt size Torque Nm
M4 3
M5 6
M6 10
M8 25
M10 50
8 Important information
 Do not reuse nuts. Always replace with a new nut.
 Always use thread locking compound.
 Always use recommended components and parts available from LEVO AG.
 Do not modify or repair the frame.
 LEVO AG is responsible for any repairs on gas springs, motors and electronic
parts.
1
1