15
11.9
Replacing the driving motor
When removing the driving motor, the wheelchair must be unoccupied. The
wheelchair must be secured so that it cannot fall over or move while replacing the
driving motor.
Take out the main fuse like described in 12.
Open the cover of the battery box and disconnect the
motor plug (A) from the power module.
Remove first the drive wheel as described in sector
8.1.
Remove the motor cover loosening the screws using
a 4 mm hexagon key.
Loosen the motor disengaging lever cable.
Now loosen the four cylinder head screws (B) at the
motor using a 6 mm hexagon key.
Mount the new motor with the four cylinder head
screws (B) using the 6 mm hexagon key again.
Fix the disengaging motor cable as described in
sector 8.7.
Reassemble the motor cover.
Mount the drive wheel in the reverse order.
Connect the motor plug to the power module.
Switch on the safety cut-out.
10
A
B
11
