11
Status LED Setup
Leviton Decora Smart Z-Wave outlets have a status light. The
functionality of this light can be changed.
Status Mode: Light On when the load is On
The status light shows the current state of the load:
1. To enter programming mode, hold the button for 7 seconds. The
status light will turn amber, release and the status light will blink.
2. Tap the button 4 times.
The status light will quickly flash green/amber.
3. Tap the button 1 time.
The status light will flash green 4 times to confirm the selection.
Light On when the load is Off
The status light is used to easily find the outlet in a dark room:
1. To enter programming mode, hold the button for 7 seconds. The
status light will turn amber, release and the status light will blink.
2. Tap the button 4 times.
The status light will quickly flash green/amber.
3. Tap the button 2 times.
The status light will flash amber 4 times to confirm the selection.
Light is always Off
1. To enter programming mode, hold the button for 7 seconds. The
status light will turn amber, release and the status light will blink.
2. Tap the button 4 times.
The status light will quickly flash green/amber.
3. Tap the button 3 times.
The status light will flash red 4 times to confirm the selection.
Customization
DR
AF
T
