1
2
3
4
6
5
7
8
An iOS (12.0 or later) or Android (8.0 or later)
mobile device.
NOTE:
Make sure Wi-Fi and Bluetooth are enabled on
your mobile device.
A My Leviton cloud account
(set up through the My Leviton app).
A 2.4GHz Wi-Fi network with high
speed internet.
Installation requires electrical knowledge.
If you are unsure of any steps, consult an electrician.
See the complete line of My Leviton
TM
app compatible
dimmers, switches, plug-ins, and controllers at
leviton.com/decorasmart.
Features
Before you install
Identify your wires
What you need to make
it work:
Your Fan Speed
Controller works with:
Leviton’s Decora Smart Wi-Fi 2nd
Generation Fan Speed Controller
makes it easier than ever to make
your ceiling fan smart. Use your
voice with Amazon Alexa, Google
Assistant, or Apple Siri—or use
your smartphone or tablet to
control with the My Leviton app,
even when away from home. Use
built-in scheduling to control your
fan at specific times of the day, or
at sunrise or sunset.
The Decora Smart Wi-Fi Fan Speed
Controller looks right at home with
your other Decora brand in-wall
devices, and features intuitive on/
off and fan speed level control.
Combine with other Decora Smart
Wi-Fi devices to create a Whole
Home experience with room
scenes, activities, and schedules
for connected lights and fans to
match your lifestyle.
•
For use with one or more ceiling
paddle fans with split-capacitor or
shaded pole motors, not to exceed
1.5A maximum load.
•
Quiet fan controller with 4 speeds: max, high, medium, low,
and off.
•
Control fan speed using the My Leviton app, schedule, voice,
or the Apple Home app.
•
Voice control works with Hey Google, Amazon Alexa, or
Apple Siri.
•
Support for 3-way/multi-location with Wired Companions
and Wireless Anywhere Companion devices.
•
Color change kits in ivory, light almond, black, gray, brown,
and white.
•
Compatible with pull chain ceiling
fans without electronic control.
•
Not for use with exhaust type fans.
•
For indoor use only.
•
Additional self-service support options can be found in
the My Leviton app or at
decorasmartsupport.leviton.com.
RATINGS
Fan Motor Input Voltage
120VAC, 60Hz
Operating Temperature
0°C - 40°C (32°F - 104°F)
Operating Humidity
10% - 90% non-condensing
Storage Temperature Range -10°C - 85°C
NETWORK
Wi-Fi
802.11 b/g/n networks - 2.4GHz only
Security
WPA, WPA2, or WPA3 security, or open
Bluetooth
v5.0
MY LEVITON APP
iOS
version 12.0 or later
Android
version 8.0 or later
Fan speed bar
Manually adjust speed.
Air gap switch
Will stop power to the fan. Gently pull
bottom out until a click is heard. Power to the fan and indicator
lights will turn off. After servicing is complete, push back in for
normal operation.
Rocker
Manually turn fan on/off.
Speed indicator lights
Shows fan speed when
adusting levels.
Status LED
•
Illuminates when the lights are OFF so
you can find the device in the dark.
•
Provides connectivity and device
status feedback.
•
Advanced settings available in the My
Leviton app.
Check your wall box:
1.
Remove wallplate and disconnect existing switch.
2.
Restore power. Carefully test wires with voltage tester to
find the Line (Hot) wire.
3.
Turn off power at the circuit breaker.
4.
Mark the wires as shown below. Please note Neutral wires
are required to operate this device.
Quick
tip:
Neutral wires are typically white and will be
found bundled inside the electrical box.
Single pole installation:
1.
Work only one connection at a time.
2.
Connect wires as shown using the included
wire connectors.
1.
Restore power. Status LED should flash GREEN.
2.
After powering on the Fan Speed Controller to confirm it
is receiving power, turn the power back off again at the
breaker prior to completing the installation.
Wire your Fan Speed
Controller
Test and install
Welcome
Things to consider:
To control the Fan Speed Controller from more than one
location such as in a 3-way or multi-way, you will need
either a wired DD00R or DD0SR Companion device, or a
wireless DAWDC or DAWSC Anywhere Companion device.
See Companion instructions for connection directions.
If your wall box looks different, call an electrician.
If your wall box contains a different wiring
configuration, contact Leviton’s Technical Support
team or consult an electrician.
WARNING: TO AVOID FIRE, SHOCK, OR DEATH,
turn off
power at the circuit breaker.
NOTE:
•
Neutral connection is required.
•
The YELLOW/RED Traveler wire is only used in hard-wired
3-way applications. Remember to put a wire connector on
the YELLOW/RED Traveler even if not in use.
If you need help...
ONLINE
decorasmartsupport.leviton.com
CHAT
www.leviton.com/support
CALL
1-800-824-3005 (USA)
1-800-405-5320 (Canada)
Easy Wi-Fi lighting
control for the
whole home
CHAT
www.leviton.com/support
CALL
1-800-824-3005 (USA)
1-800-405-5320 (Canada)
ONLINE
decorasmartsupport.leviton.com
We are here to help
LINE
NEUTRAL
LOAD
TRAV
GND
GROUND
GROUND
NEUTRAL
GROUND
GROUND
NEUTRAL
TRAVELER
TRAVELER
LOAD
LOAD
To Fan
To Fan
LINE
LINE
From
From
Branch Circuit
Branch Circuit
GROUND
GROUND
NEUTRAL
LOAD
LOAD
LINE
LINE
To Fan
To Fan
From
From
Branch Circuit
Branch Circuit
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747
© 2021 Leviton Manufacturing Co., Inc. All rights reserved.
Specifications subject to change at any time without notice.
DI-000-D24SF-02A
Getting Started Guide
Cat. No. D24SF
FAN SPEED CONTROLLER
2
ND
GEN
•
Not for use with lighting loads or
combined ceiling fan light kits.
•
Not for use with aluminum wire.
•
Installation in metal wall boxes or
with metal wall plates may result in
poor RF performance.
WEB
VERSION
