AC OUTPUT RECEPTACLES
The standard version of the DDS rack dimmers have two AC output receptacles for each channel. These receptacles provide power
to the lamps in your lighting system. The amount of power supplied to these outlets controls the intensity of the lamps connected.
The total lamp wattage connected to each channel must not exceed the rating of each channel (see specifications). Most 120VAC
lamps and fixtures and some transformer type low-voltage fixtures may be connected to these outlets, DO NOT connect motors
or fluorescent lighting to these outlets when the channel is operating in dimmer mode.
NOTE: Some inductive type loads such as transformers, ballasts, and motors, with poor power factor may cause the dimmer
to output D.C. type current. This may cause the load to draw excessive current and overheat, causing damage to the
transformer, ballast, or motor. For this reason, it is necessary to insure any inductive loads are fused individually for their
respective normal operating current.
INSTALLATION AND OPERATION GUIDE
DDS 86/88/96/9800 DIMMER PACKS
Software Revision 1.41, Version C UL, Mfg Q3/96, and above
4
NSI CORPORATION
