Leviton A8810-41M, Руководство по установке

Страница: 14 / 19

11
3.5 Step by Step Commissioning
The following is a basic setup to enable Remote Access to the A8810 Hub to complete the
configuration process.
Confirm the DAS is properly connected to the computer or a LAN, and both are powered on.
3.5.1 DHCP Enabled Mode
3.5.1.1 Confirm that DHCP is enabled on the computer. For most computers, this
is the default setting.
3.5.1.2 To confirm you have established connection to the device, do a ping to the
IP address shown in the DAS’s LCD display. If no packets were lost, the
connection is working and you are ready to proceed.
3.5.1.3 Open a browser and type the IP address, shown on the LCD display of the
EMB Hub, in the address bar.
3.5.1.4 This will open the web browser interface of the EMB Hub.
3.5.1.5 At initial setup a password must be created. Click on the “click here for
Password Setup” to create the admin user password.
3 INTERNAL COMPONENT CONFIGURATION AND OPERATION