manualshive.com logo in svg

Leviton 6P201-C02, Руководство по установке

Поделиться
Скачать
Leviton 6P201-C02 Скачать руководство пользователя страница 4

1 WARNINGS 

AND 

CAUTIONS

The following section contains installation and wiring instructions for the Leviton Mini Meter 
in indoor Surface Mount enclosure. If technical assistance is required at any point during 
the installation, contact information can be found at the end of this manual. Leviton is not 
responsible for damage to the meter caused by incorrect wiring, which will void the product’s 
warranty.

4

WARNING:  

•   

TO AVOID FIRE, SHOCK OR DEATH; TURN OFF POWER 

at circuit breaker or fuse 

and test that the power is off before installing product or servicing current transformers.

 • 

 TO AVOID FIRE, SHOCK OR DEATH;

 Look inside the meter and electrical panel for 

possible exposed wire, broken wire, damaged components or loose connections.

• Make sure all tools used during installation have proper installation ratings.

•  Installations should be done in accordance with local codes and current National  

Electric Code requirements, and performed by trained, qualified professionals.

•  Equipment used in a manner not specified by this document impairs the protection 

provided by the equipment.

CAUTIONS:

•  Verify the model number and electrical specifications of the device being installed to 

confirm they are appropriate for the intended electrical service  
(see Section 3).

•   Consult local codes for any possible permits or inspections required before beginning 

electrical work.

•  Like repeaters, MDTs should not be mounted inside a metal box or near a metal wall 

(i.e. heating furnace or electrical panel). Consult the Tehama QuickStart Guide, which 
can be downloaded from the manufacturers website.

•    MDTs must be mounted using velcro, tie-wraps, or screws. Don’t let the MDT 

dangle by the pulse input wire.

• Avoid locations with dampness, high humidity, or an abundance of mold.

•  Ensure the conduit for the installation is flexible and non-metallic. For outdoor 

applications conduit and conduit fittings must be rated UL Type 4X for outdoor 
enclosures. Failure to use the appropriate conduit impairs the degree of equipment 
protection.

WEB 

VERSION

Содержание 6P201-C02

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды