Levita LT 61, Руководство оператора, Страница: 89 / 136

-89-
Do not let debris and dry remains of grass accumulate in
upper part of the cutting deck in order to keep maximum machine efficiency and safety
levels.
After each use, accurately clean the cutting deck to remove any grass remains or debris.
Wear eye protection and keep people or animals away
from the surrounding area when cleaning the cutting deck.
a) When washing the inside of the cutting deck and the
collector channel, the machine must be on firm ground:
1. fit the grass-catcher;
2. connect a water hose to its pipe fitting (1), and run water through it;
3. sit at the operator’s position;
4. lower the cutting deck completely;
5. start the engine and stay in neutral;
6. engage the blade and leave it to turn for a few minutes.
Take off the grass-catcher, empty and rinse it, then put it in a position where
it can dry quickly.
b) To clean the upper part of the cutting deck:
−
lower the cutting deck completely (position «1»);
−
blow a jet of compressed air to remove any remains of grass.
5.4.11 Storage and inactivity for long periods
If the machine is likely to be unused for a long period (more than 1 month),
，
follow the
instructions in the engine manual.
Empty the fuel tank by removing the screw situated
at the bottom of the carburetor, and collects the
fuel in a suitable container.
Carefully remove any
dry grass cuttings which may have collected
around the engine or silencer to prevent their
catching fire the next time the machine is used!
Put the machine away in a dry, sheltered place and preferably covered with a cloth.
1
1