Levita LM 32A, Руководство по эксплуатации, Страница: 20 / 30

20 / 30
Explanation of the warning signs on the equipment (see Fig. below)
1 2 3 4 5
7 8
6 9 10
1 = Read the instructions for use before operating the equipment.
2 = Keep all other persons away from the danger zone.
3 = Caution! Sharp blades! Before carrying out any maintenance work or if you damage the cable, pull
the plug out of the socket.
4 = Caution: Keep the power cable away from the blades!
5 = Do not expose the equipment to rain or moisture.
6 = Caution: The blades continue to run after the motor is switched off!
7, 8, 9 = Wear hand protection! Wear eye protection! Wear foot protection!
10 = Appliance with double insulation.
2. Description of the machine (see Fig. A)
1. On/off switch lever 5. Upper handle fastenings 9. Motor hood
2. Upper handle 6. Lower handle 10. Wheel
3. On/off switch block 7. Grass collection box 11. Extension cable holder
4. Lock-off button 8. Deflector plate
3. Assembly
Warning! Before assembly, make sure that the appliance is switched off and unplugged.
The lawn mower is supplied with some components to be assembled. These can be easily assembled
by following the instructions below and hardware separately supplied in the package.
a) Wheel assembly (Fig. B1-B3)
◆
Slide the wheel (1) onto the axle.
◆
Insert the cotter pin (2) into the hole in the axle and secure it by the bending.
◆
Fit the cap (3).
b) Handle assembly (Fig. B4-B5)
◆
Remove the lawn mower from this package. The package also contains the two parts of the
handle.
◆
Locate the lower handle into the holes in the rear body of the mower (Fig. B1) and fix them with
two screws.
◆
Pull on the cable holder onto the upper handle.
◆
Fit the upper handle to the lower handle (Fig. B2) using the attached bolts and knobs (5).
c) Cable clips
◆
Secure the cable to the handle by the cable clips to prevent damage from using the machine and
handling the grass box.
Note: Check, eventually tighten all screws.