1. Open the drain valve (1) and insert the enclosed handle (extension) in the pumping arm (2).
To ensure the oil distributes itself completely, carry out approx. 6 full pumps of the handle.
2. Close the drain valve - the vehicle jack is now ready for use.
3. Locate your vehicle on an even, firm surface and secure the vehicle against rolling as specified by
the vehicle manufacturer.
4. To ensure safe lifting, position the jack at a 90° angle to the vehicle and under the appropriate
jacking point (see the manufacturer’s instructions).
5. Insert the handle in the drain valve and close it by rotating clockwise until the limit stop is reached.
6. Insert the handle in the pumping arm and pump the handle until the saddle (3) is in contact with the
vehicle.
7. Check again that the jack is seated correctly.
8. Continue pumping the handle until the vehicle has been lifted to the desired height.
Caution:
Observe the vehicle carefully during the lifting operation. The jack should move in
the direction of the vehicle during lifting. Should this not be the case, there is a strong possibility
that the vehicle will slide off the jack.
9. Put the handle out of the pumping arm. (Risk of accident!)
10. Secure the load with suitable jack stands before commencing work on or under the vehicle.
Caution:
Working on or under the vehicle without first appropriately securing the raised load is
prohibited! (Risk of accident!)
11. After you have finished working on the vehicle, open the drain valve by carefully twisting the jack
handle in small increments in a counterclockwise direction until the vehicle begins to move
downwards.
12. Once the vehicle is firmly on the ground, the drain valve can be opened again (approx, one half
turn) in order to return the lifting arm (4) all the way to the bottom in the starting position.
13. Before lifting the load, check that the drain valve is properly closed.
14. All moving parts must be lubricated in accordance with the operators’ manual and maintained on a
regular basis.
15. When the vehicle jack is not in use, the lifting arm should be in the lowest position and the handle
in an upright position to protect the precision mechanics from damage. The vehicle jack must
be stored in a horizontal position and in a dry location. Ensure the jack remains in its original
condition. Do not undertake any modifications to the device.
16. Use only SAE10 (SAE: Society of Automotive Engineers) grade, special-purpose hydraulic oil for
the pump. Dispose of all used and spilled oil appropriately.
17. Do not use a high pressure cleaner to clean the jack. All external moving parts, e.g. the foot roller
bearings (5), fastening bolts of the lifting arm (6), fastening bolts of the lifting arm cylinder (7) and
fastening bolts of the pumping arm (8) must be well lubricated regularly every 3 months.
IMPORTANT:
Never lubricate or grease the rods of the pump (9) and lifting cylinder (10).
18. All maintenance and repair work must be performed by a suitably qualified personnel an in
accordance with the manufacturer's instructions.
19.
Caution:
Do not use the jack if there are any missing, loose or broken parts!
Before using the floor jack, check for loss of oil, damage or missing accessories.
General usage instructions
First time operation:
Lifting the vehicle:
Storage & care:
Содержание T830025
Страница 5: ......
