4
MODE button
This button switches between 3 in-built modes: 1) photo mode; 2) video mode; and 3) playback mode.
The default mode is video mode.
IR UP and IR DOWN buttons
If the light is insufficient or when used in the evening, turn on the IR by pressing the
IR UP
button. The image will change from color
to black and white. You may select the brightness level from 1 to 7 using the
IR UP
and
IR DOWN
buttons. A long press on the
buttons will zoom in/out the image.
Notes:
•
Do not use IR in daylight (when IR is on, you will have a color image, when IR is off — black and white image).
•
If the battery power is not enough, the IR LED level will lower automatically.
MENU button
To change the settings, press the
MENU
button and highlight the desired menu item by scrolling up (
IR UP
button) or down (
IR
DOWN
button).
Select the highlighted item by pressing the
SHOT
button.
In the menu, you can select photo or video resolution, night vision sensitivity, change the language, set the date, set auto power off,
put the date on photos or videos, format the memory card, view and delete the current file or all files from the memory card, etc.
Note:
To get to the submenu of the playback mode, you need to select the playback mode first (
MODE
button).
SHOT button
Button functions:
1) takes a picture in Photo mode; 2) starts and stops video recording in Video mode; 3) enters the sub-menu.
Copying files
You can transfer files from the device to your smartphone, tablet, or PC directly.
1. Insert the memory card into a card reader; or
2. Connect the device to your computer with a USB cable.
Cleaning and precautions
Do not expose the device to direct sunlight — that could cause a fire!
Do not scratch or touch the optical surfaces with your fingers.
Remove the batteries before cleaning the device! Use only dry, lint-free cloths to wipe the outer parts of the device. Do not use
cleaning fluid to avoid the electronics damage. To avoid scratching the lenses, only use a soft cloth and do not press too hard. Keep
the device away from dust and water. Keep the device in a bag or a box. Remove the batteries from the device if it has not been used
for a long time.
Battery safety instructions
Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries
at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the
device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and –). Remove batteries
from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries
as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble
batteries. Remember to switch off devices after use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation,
or poisoning. Utilize used batteries as prescribed by your country’s laws.
Levenhuk International Lifetime Warranty
All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a
lifetime warranty
against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All
Levenhuk accessories are warranted to be free of defects in materials and workmanship for
six months
from the purchase date. The
warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if
all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.