10
the WRE-6001 is connected and suitable for Internet
Connections.
5. Check if the Wifi Signal Strength is OFF, the WRE-6001
isn’t
connected and not suitable for Internet Connections. Please
repeat
STEP-2
of WPS Pairing or follow next STEP-
4
to have
it connected and suitable for Internet connections.
If the WRE-6001 WiFi signal strength LED isn't ON, please
repeat STEP-2 WPS Pairing or goes STEP-4 configure the
WRE-6001 through Advanced Configuration below.
STEP 3
11n Repeater Advanced Configuration(Figure 3)
1. Please make sure your PC can get IP address automatically,
so the router can communicate with your PC during
configuration.
Select “Control Panel” > “Network Connections”.
Right click the “Local Area Connection” and choose
“Properties”.
Select the TCP/IP protocol for your network card.
Click on the Properties button. You should then see the
following screen and make sure you have selected
“Obtain IP address automatically”.
Содержание WRE-6001
Страница 6: ...6 Figure 2 Figure 3...
Страница 7: ...7 Figure 4 Figure 5...
Страница 8: ...8 Figure 6 Figure 7...
