1. Connect your projector to the
Wireless Projector Server's VGA port
(Fig. 1) with the VGA cable from your
projector.
2. If you wish to connect the Projector
Server to your network, plug one end
of a standard UTP Ethernet cable
(RJ45) into the Projector Server's
LAN Port (Fig. 2). Connect the other
end of the Ethernet cable into a
networked hub or switch.
3. Plug the power adapter cord into the
Projector Server's power port and the
other end to a power outlet (Fig. 3).
4. Press the Power Switch to turn on the
Projector Server.
5. Power on the projector and select its
respective input. The Projector Server's
on-screen menu (fig. 4) will show on the
projected image.
B) Configure the Projector Server
1. Select the
System Setup
from the menu (Fig. 4).
2. Enter the administrator
password (default is
654321
) from the
prompted screen (Fig. 5)
To configure the Projector Server at the on-screen menu, you will
need the IR remote controller or a USB keyboard and mouse
connected to the Projector Server.
pg 2
pg 1
A) Connect the Projector Server
Wireless Projector Server
Quick Start Guide
The Projector Server’s USB port currently does not support hot-
plugging function for a USB mouse . If you wish to use it, make
sure to plug it in before booting the system.
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
