LevelOne WHG-311 Скачать руководство пользователя страница 202

Страница: 202 / 307

202

The description of the above-mentioned table is as follows:

Item

Description

Firmware Version

The present firmware version of WHG CONTROLLER

Build

The current build number.

System Name

The system name. The default is WHG CONTROLLER

Portal URL

The page the users are directed to after initial login success.

Syslog server- System Log

The IP address and port number of the external Syslog Server.

N/A

means

that it is not configured.

Syslog server- On-demand Users Log

The IP address and port number of the external Syslog Server.

N/A

means

that it is not configured.

Proxy Server

Enabled/disabled stands for that the system is currently using the proxy

server or not.

Warning of Internet Disconnection

Enabled/Disabled stands for the connection at WAN is normal or abnormal

(

Internet Connection Detection

) and all online users are

allowed/disallowed to log in the network.

WAN Failover

Enabled/Disabled stands for the function currently being used or not.

Load Balancing

Enabled/Disabled stands for the function currently being used or not.

SNMP

Enabled/disabled stands for the current status of the SNMP management

function.

User Logs

Retained Days

The maximum number of days for the system to retain the users’

information.

Receiver Email

Address (es)

The email address to which the traffic history or user’s traffic history

information will be sent.

System Time

NTP Server

The network time server that the system is set to align.

Time

The system time is shown as the local time.

User Session Control

Idle Time Out

The minutes allowed for the users to be inactive before their account expires

automatically.

Multiple Login

Enabled/disabled stands for the current setting to allow/disallow multiple

logins form the same account.

DNS

Preferred DNS

Server

IP address of the preferred DNS Server.

Alternate DNS

Server

IP address of the alternate DNS Server.

Содержание WHG-311




















































































































































































































































































































Результаты поиска

Содержание WHG-311

Отзывы:

LevelOne WHG-311, Руководство пользователя, Страница: 202 / 307

Результаты поиска

Содержание WHG-311

Отзывы: