LevelOne WHG-311, Руководство пользователя, Страница: 147 / 307

147
Basically, all of the managed AP can become a Rogue AP sensor, but some earlier version AP will not support this
function, they will list in the Sensor List , but they are not available for selection, so the Sensor List will list all of the
managed AP. Select the APs and click Apply .
3. Add the non-managed AP to the Trust List
Configure Trust AP List; go to: Access Points >>Rogue AP Detection >>Trusted AP Configuration .
After the AP detection is finished. All of the non-managed AP will show in the List.
If there are some APs that are trusted by administrator, or these APs are just temporary usage. So you can add
these APs to the Trust List, and then system will ignore these APs and will not show in the Rogue AP List again.
Also you can check which AP had added to trust list by the Trusted AP List .