LevelOne WBR-3460 Скачать руководство пользователя страница 39

Страница: 39 / 129

PC Configuration

Macintosh Clients

From your Macintosh, you can access the Internet via the Wireless ADSL2/2+ Modem
Router. The procedure is as follows.

1. Open the TCP/IP Control Panel.

2. Select

Ethernet

from the

Connect via

pop-up menu.

3. Select

Using DHCP Server

from the

Configure

pop-up menu. The DHCP Client ID

field can be left blank.

4. Close the TCP/IP panel, saving your settings.

Note:

If using manually assigned IP addresses instead of DHCP, the required changes are:



Set the

Router Address

field to the Wireless ADSL2/2+ Modem Router's IP Ad-

dress.



Ensure your DNS settings are correct.

Linux Clients

To access the Internet via the Wireless ADSL2/2+ Modem Router, it is only necessary
to set the Wireless ADSL2/2+ Modem Router as the "Gateway".

Ensure you are logged in as "root" before attempting any changes.

Fixed IP Address

By default, most Unix installations use a fixed IP Address. If you wish to continue using
a fixed IP Address, make the following changes to your configuration.



Set your "Default Gateway" to the IP Address of the Wireless ADSL2/2+ Modem
Router.



Ensure your DNS (Name server) settings are correct.

To act as a DHCP Client (recommended)

The procedure below may vary according to your version of Linux and X -windows
shell.

1. Start your X Windows client.

2. Select

Control Panel - Network

3. Select the "Interface" entry for your Network card. Normally, this will be called

"eth0".

4. Click the

Edit

button, set the "protocol" to "DHCP", and save this data.

5. To apply your changes



Use the "Deactivate" and "Activate" buttons, if available.



OR, restart your system.

Other Unix Systems

To access the Internet via the Wireless ADSL2/2+ Modem Router:



Ensure the "Gateway" field for your network card is set to the IP Address of the
Wireless ADSL2/2+ Modem Router.



Ensure your DNS (Name Server) settings are correct.

Содержание WBR-3460


































































































































Результаты поиска

Содержание WBR-3460

Отзывы:

Бренды по названию

Популярные бренды

LevelOne WBR-3460, Руководство пользователя

Результаты поиска

Содержание WBR-3460

Отзывы:

Бренды по названию

Популярные бренды