LevelOne Wireless Broadband Router User Guide
Modem Properties Screen
This screen is reached via the
Modem Properties
button on the
Dial-in
screen.
•
Normally, it is not necessary to change these settings.
•
Refer to your Modem's user manual to determine the "AT" commands it supports.
Figure 42: Modem Properties Screen
Data - Modem Properties Screen
Initial String
This is a series of AT commands used to correctly configure your
modem or ISDN TA.
See
Appendix C - AT Commands
for further details about the
required
Initial String
settings and standard AT commands.
Dial Type
•
Select Tone, Pulse or Other to match your system.
•
For Other, you must provide the Dial String.
Dial String
•
This is the "AT" command sent to your modem before
dialing. For example, "ATDT" tells your modem to use Tone
Dialing.
•
Check your modem's documentation to find the correct AT
commands.
Auto Answer Com-
mands
•
Enter the command strings which turn the "auto-answer"
function in your modem (or ISDN TA) ON and OFF.
•
Check your modem's documentation to find these commands.
76