PC Configuration
Macintosh Clients
From your Macintosh, you can access the Internet via the LevelOne Wireless Broadband
Router. The procedure is as follows.
1. Open the TCP/IP Control Panel.
2. Select
Ethernet
from the
Connect via
pop-up menu.
3. Select
Using DHCP Server
from the
Configure
pop-up menu. The DHCP Client ID field
can be left blank.
4. Close the TCP/IP panel, saving your settings.
Note:
If using manually assigned IP addresses instead of DHCP, the required changes are:
•
Set the
Router Address
field to the LevelOne Wireless Broadband Router 's IP Address.
•
Ensure your DNS settings are correct.
Printing
If you wish to share the printer connected to the LevelOne Wireless Broadband Router, using a
LaserWriter or compatible is required.
Installing the Printer
To gain access to the printer connected to the LevelOne Wireless Broadband Router, follow
this procedure:
1. Select
Control Panel - Network
.
2. Ensure
that
EtherTalk
is selected under
AppleTalk Connection
.
3. Open
Chooser
, and select the correct printer type (e.g. LaserWriter).
4. From the list of available printers on the right, select the LevelOne Wireless Broadband
Router, then click
Create
.
5. The new printer will be created, and can be used like any other printer.
43