Wireless Access Point User Guide
mv -- Move file
np -- Network Performance
ns -- Network Performance Server
ping -- Ping
pktLog -- Packet Log
radar! -- Simulate radar detection on current channel
reboot -- Reboot Access Point
rm -- Remove file
run -- Run command file
quit -- Logoff
set 11gonly-- Set 11g Only Allowed
set 11goptimize -- Set 11g Optimization Level
set 11goverlapbss-- Set Overlapping BSS Protection
set abolt --
set acl -- Set Access Control List
set aging -- Set Aging Interval
set antenna-- Set Antenna
set authentication -- Set Authentication Type
set autochannelselect -- Set Auto Channel Selection
set basic11b -- Set Use of Basic 11b Rates
set basic11g -- Set Use of Basic 11g Rates
set beaconinterval -- Modify Beacon Interval
set burstSeqThreshold -- Set Max Number of frames in a Burst
set burstTime -- Set Burst Time
set calibration -- Set Calibration Period
set cckTrigHigh -- Set Higher Trigger Threshold for CCK Phy Errors For ANI Control
set cckTrigLow -- Set Lower Trigger Threshold for CCK Phy Errors For ANI Control
set cckWeakSigThr-- Set ANI Parameter for CCK Weak Signal Detection Threshold
set channel-- Set Radio Channel
set cipher -- Set Cipher
set compproc -- Set Compression Scheme
set compwinsize -- Set Compression Window Size
set countrycode -- Set Country Code
set ctsmode-- Set CTS Mode
set ctsrate-- Set CTS Rate
set ctstype-- Set CTS Type
set description -- Set Access Point Description
88
