3. Operation
The power on state of 8/16 port KVM switch:
When you power on KVM switch, it will ask you the password, the default password value is
eight zero –“ 00000000 “. Please key in eight zero and enter the same value at retype field.
Note: Before you are not familiar with the operation of OSD manual, please don’t change
the password – i.e. keep default eight zero (00000000) value. Otherwise, if you have set the
password and unfortunately forget the password, you need send it back to your distributor
for maintaining the password.
Default password is eight zero –“ 00000000 “
Push Buttons
Pressing the individual button cyclically through all the ports or the respective button to get
PC port you want.
PC port LED Indication
You can press the button in order like mentioned-above diagram.
When you select the PC port and this PC is shut down or this PC port is disconnected to the
PC, the selected PC port LED will flash. When you select one of eight PCs ports and this
PC is powered on, the selected PC port LED is lit.
7-Segment BANK LED Indication
When you would like to view the next bank KVM switch, please press “ BANK “ push button
cyclically to the destination bank. The bank LED will be changed from bank 1 to the
maximum daisy chain level and then to press “ BANK “ push button once back to the bank
1.
Bank 1 Bank 2 Bank 3 MAX BANK
10
