HUBBLE series
System Administrator’s
Manual
66
Date & Time
NVR provides three methods to synchronize the time setting; you can (1) manually set the
date and time, (2) sync with Time Zone or (3) synchronize with NTP server.
Go to
System
Setup
→
System
tab
→
click “
Date and Time
”.
Setup Manually
In
Date & Time
section, click the button that shows date and time information on it. On the
popped-out calendar, select the correct date and time, then click “
OK
”.
Synchronize with Time Zone
In
Time Zone
section, select your zone from the
Time Zone
drop-down list. If your time zone
falls in Daylight Saving Time area, you may check the box “
Enable Daylight Saving Time
”
,
and then system time will automatically adapt itself to daylight saving time clock.
Synchronize with NTP server
In
NTP Server
section, fill in the NTP server IP or domain name in the NTP Server field, and
click “
Apply
” to start synchronizing.
