HUBBLE series
System Administrator’s
Manual
15
WAN Port
WAN
port is a typical Ethernet port. You will have to use this port to connect with a different
network segment when your system requires (1) the connection with a remote PC client or
network cameras, (2) the use of event-triggered e-mail service via an external SMTP server
(3) the use of date/time synchronization with external NTP server.
By default, once connecting to a network, it will first try to get an IP address assigned by your
network router from DHCP server. If your network does not assign IP address automatically,
then
WAN
port will assume IP address
192.168.1.10
.
Connection Setting Example 2
The diagram below displays an example connection setting using
LAN
+
WAN
to connect
networks cameras within different network segments.
In this setting, NVR with three cameras are within the same network segment, while there is
another camera locating in another network. In addition, this system requires the connection
with an external SMTP server and a remote client.
