LevelOne GTL-2881 Скачать руководство пользователя страница 282

Страница: 282 / 706

Chapter 12

| Security Measures

AAA (Authentication, Authorization and Accounting)

– 282 –

Parameters

These parameters are displayed:

Configure Method

◆

Authorization Type

– Specifies the service as Exec, indicating administrative

authorization for local console, Telnet, or SSH connections.

◆

Method Name

– Specifies an authorization method for service requests. The

“default” method is used for a requested service if no other methods have been
defined. (Range: 1-64 characters)

◆

Server Group Name

- Specifies the authorization server group.

(Range: 1-64 characters)

The group name “” specifies all configured hosts (see

“Configuring Local/Remote Logon Authentication” on page 269

). Any other

group name refers to a server group configured on the Group
Settings page. Authorization is only supported for servers.

Configure Service

◆

Authorization Type

– Specifies the service as Exec, indicating administrative

authorization for local console, Telnet, or SSH connections.

◆

Console Method Name

– Specifies a user defined method name to apply to

console connections.

◆

VTY Method Name

– Specifies a user defined method name to apply to Telnet

and SSH connections.

Show Information

◆

Authorization Type

- Displays the authorization service.

◆

Method Name

- Displays the user-defined or default accounting method.

◆

Server Group Name

- Displays the authorization server group.

◆

Interface

- Displays the console or Telnet interface to which these rules apply.

(This field is null if the authorization method and associated server group has
not been assigned to an interface.)

Web Interface

To configure the authorization method applied to the Exec service type and the
assigned server group:

Click Security, AAA, Authorization.

Select Configure Method from the Step list.

Содержание GTL-2881



































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание GTL-2881

Отзывы:

Похожие инструкции для GTL-2881

Бренды по названию

Популярные бренды

LevelOne GTL-2881, Руководство пользователя

Результаты поиска

Содержание GTL-2881

Отзывы:

Похожие инструкции для GTL-2881

Бренды по названию

Популярные бренды