LevelOne GSW-1676 Скачать руководство пользователя страница 60

Страница: 60 / 150

ONFIGURING

THE

WITCH

6-12

Received Multicast Packets

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a multicast

address at this sub-layer.

Received Broadcast Packets

The number of packets, delivered by this sub-layer to a

higher (sub-)layer, which were addressed to a broadcast

address at this sub-layer.

Transmitted Octets

The total number of octets transmitted out of the interface,

including framing characters.

Transmitted Unicast Packets The total number of packets that higher-level protocols

requested be transmitted to a subnetwork-unicast address,

including those that were discarded or not sent.

Transmitted Errors

The number of outbound packets that could not be

transmitted because of errors.

Received Medium Priority

Packets

The total number of received packets that are set as

Medium Priority in the QoS settings.

Received Low Priority Packets The total number of received packets that are set as Low

Priority in the QoS settings.

Transmitted Medium Priority

Packets

The total number of transmitted packets that are set as

Medium Priority in the QoS settings.

Transmitted Low Priority

Packets

The total number of transmitted packets that are set as Low

Priority in the QoS settings.

RMON Statistics

Drop Events

The total number of events in which packets were dropped

due to lack of resources.

Received Frames

The total number of frames (bad, broadcast and multicast)

received.

Multicast Frames

The total number of good frames received that were

directed to this multicast address.

Undersize Frames

The total number of frames received that were less than 64

octets long (excluding framing bits, but including FCS

octets) and were otherwise well formed.

Fragments

The total number of frames received that were less than 64

octets in length (excluding framing bits, but including FCS

octets) and had either an FCS or alignment error.

Port Statistics (Continued)

Parameter

Description

Содержание GSW-1676























































































































































Результаты поиска

Содержание GSW-1676

Отзывы:

Похожие инструкции для GSW-1676

Бренды по названию

Популярные бренды

LevelOne GSW-1676, Руководство пользователя

Результаты поиска

Содержание GSW-1676

Отзывы:

Похожие инструкции для GSW-1676

Бренды по названию

Популярные бренды