LevelOne GSW-0891 Скачать руководство пользователя страница 68

Страница: 68 / 110

Port Control interface

Port Trunk

The Link Aggregation Control Protocol (LACP) provides a standardized means for

exchanging information between Partner Systems on a link to allow their Link

Aggregation Control instances to reach agreement on the identity of the Link

Aggregation Group to which the link belongs, move the link to that Link Aggregation

Group, and enable its transmission and reception functions in an orderly manner. Link

aggregation lets you group up to 4 ports into one dedicated connection. This feature can

expand bandwidth to a device on the network.

LACP operation requires full-duplex

mode,

for more detail information please refer to IEEE 802.3ad.

Port Trunk - Aggregator setting

System Priority:

A value used to identify the active LACP. The switch with the

lowest value has the highest priority and is selected as the active LACP.

Содержание GSW-0891















































































































Результаты поиска

Содержание GSW-0891

Отзывы:

LevelOne GSW-0891, Руководство пользователя, Страница: 68 / 110

Результаты поиска

Содержание GSW-0891

Отзывы: