LevelOne GEP-2650, Руководство пользователя, Страница: 99 / 109

15.3. Close the port rate limitation
Enter the interface pattern to close the Rate limitation.
Command Function
Switch(config-if-GigabitEthernet-
0/1)# no rate-limit
Close the port Upstream Rate Limitation
Switch(config-if-GigabitEthernet-0/
1)# no traffic-shape
Close the port Downstream Rate Limitation
Below is the example to close the port upstream Rate limitation
：
Switch#configure terminal
Enter configuration commands, one per line. End with CTRL+Z.
Switch(config)#interface gigabitEthernet 0/1
Switch(config-if-GigabitEthernet-0/1)# no rate-limit
Below is the example to close the port Downstream Rate limitation
：
Switch#configure terminal
Enter configuration commands, one per line. End with CTRL+Z.
Switch(config)#interface gigabitEthernet 0/1
Switch(config-if-GigabitEthernet-0/1)# no traffic-shap
15.4 Check the port upstream rate limitation information
Enter the privileged pattern, check the port upstream limitation information by below
Commands.
Command Function
Switch#show rate-limit [ interface ] Show the upstream rate limitation information.
Below is the example to show the port upstream Rate limitation information
：
Switch#show rate-limit
Gi 0/1
rate-limit 64 12000 120000
64
：
Rate
12000
：
Excess Burst size
120000
：
Excess Burst size