Users can not enter the port number,through the show poe interfaces status command to display all
port state of POE power supply,can show poe interface configuration command to display all the ports
of POE configuration information.
Show all PoE port state of power supply:
Switch#show poe interfaces status
Interface Power Power Curr Avg Peak Curr Trouble PD
Control Status Power Power Power Current Cause Class
-------------------------------------------------------------------------------------------
* Gi0/1 Normal Powering 2.138W 2.217W 2.296W 40mA 0 3
* Gi0/2 Normal Powering 17.106W 17.186W 17.267W 320mA 0 4
Gi0/3 Normal Detecting 0W 0W 0W 0mA 0 N/A
Gi0/4 Normal Detecting 0W 0W 0W 0mA 0 N/A
Gi0/5 Normal Detecting 0W 0W 0W 0mA 0 N/A
Gi0/6 Normal Detecting 0W 0W 0W 0mA 0 N/A
Gi0/7 Normal Detecting 0W 0W 0W 0mA 0 N/A
Gi0/8 Normal Detecting 0W 0W 0W 0mA 0 N/A
Display all POE port configuration information:
Switch#show poe interfaces configuration
Interface Power Power Max Alloc Port Port
Control Status Power Power Priority Legacy
-----------------------------------------------------------------
* Gi0/1 Normal Powering 30W 20W High N/A
* Gi0/2 Normal Powering 30W 30W High N/A
Gi0/3 Normal Detecting 15.123W 30W Critical N/A
Gi0/4 Normal Detecting 30W 30W Critical N/A
Gi0/5 Normal Detecting 30W 0W Low N/A
Gi0/6 Normal Detecting 30W 0W Low N/A
Gi0/7 Normal Detecting 30W 0W Low N/A
Gi0/8 Normal Detecting 30W 0W Low N/A
I
D
Port trouble cause
Instructions
0
None
Normal power supply
1
Overload During Startup
Detection stage, found that the current is too big and
disconnect
2
Power Overload due to Icut
PD equipment overload and disconnect the power
3
Short Circuit Detected
PD equipment short circuit and broken
4
Thermal Powerdown
High temperature protection and shut down
5
Power Management
Shut down power management
6
VEE UVLO
Hardware fault and shut down
