7
DIP-switch
The DIP-switch is used to configure operation mode for LLF (Link
Lost Forwarding) and operation mode for UTP/Fiber port. The
default value of DIPswitch is OFF.
Fast Ethernet Module
No
Status
Description
1
ON
LFP is Enable
OFF
LFP is Disable
2
ON
Modified cut-through switch mode is enable
OFF
Store and forward switch is enable
3
ON
force the TX port work 10/100Mbps,full/half
duplex
OFF
auto-negotiation mode is enable
4
ON
TX is 10Mbps
OFF
TX is 100Mbps
5
ON
TX is half duplex
OFF
TX is full duplex
6
ON
Normally close
Gigabit Ethernet Module
No
Status
Description
1
ON
LFP Enable
OFF
LFP Disable
Pin 2 Pin3
ON
OFF
ON
Pass through
Smart pass through
OFF
Modified cut through
Store and forward